Copyright © 2017 GAU JING MACHINERY INDUSTRIAL CO., LTD.  | design by megaweb

1/2

SERIES DEMAND

/ Extra wide cutting

   capacity
/ Maximum

   convenience of set up
/ Heavy duty quality

   level

The GL series 4-side moulder from GAU JING are here. A complete line of quality-proven moulders with GAU JING’s advanced design concept. Now you have moulders that can handle the toughest moulding jobs with ease.

The GL series 4-side moulder are everything you’ve been looking for extra heavy cutting, extra wide cutting, and high productivity. For instance, the GL series 4-side moulder makes it easy for moulding beams of a wooden house. Its rugged and precision construction throughout fully eliminates vibration and yields finish surface quality part after part.

The dynamically balanced spindle is hydraulically supported at end, which means maximum stability during cutting is guaranteed. With the optional straight knife and profile knife jointing devices combined with computerized automatic position control, and you can greatly upgrade operation convenience and cutting stability. Another optional 60 or 80 m/min high speed feed allows you to achieve higher production output. Air loaded pressure roller with multiple-stage control ensure consistent pressure throughout the entire feed system. For heavy duty cutting problems, the GAU JING GL series 4-side moulder always provides the best solution.

SPECIFICATIONS

SERIES FEATURES

01.

HYDRAULIC SUPPORT ON TOP AND BOTTOM SPINDLE

+Specially designed hydraulic supports on the top and bottom spindles assure maximum stability while performing high speed and heavy duty machine.

02.

AIR LOADED FRONT PRESSURE PLATE

+The front pressure plate for top spindle is available to apply an air loading device ensuring maximum stability while performing high speed cutting.

03.

CENTRALIZED PRESSURE REGULATION

+All pressure regulations for the entire pneumatic system are centralized at the front of the machine for added convenience for pressure regulations.

 

+Sectional pressure adjustments for all pressure rollers ensure consistent pressure.

04.

CONVENIENT SPINDLE ADJUSTMENT

+All control levers for the spindles are located at the front of the machine for convenient adjustment.

+Each spindle is provided with a mechanical digital readout, and gives accurate adjustment.

05.

CENTRALIZED LUBRICATION

+The spindles are lubricated by the centralized lubrication system for convenience.

06.

POWER INFEED TABLE ROLLER

+The roller in the infeed table is powered, providing a smooth feeding effect for feed stock.

07.

AIR LOADED INFEED SIDE PRESSURE

+While high speed feeding, the side pressure roller on infeed table ensures every timber close to the fence even under different width. It’s convenient to adjust.

08.

OVER HEIGHT PROTECTION

+In case workpiece exceeds the rated maximum height, it will be restricted by the over height protection device provide at the workpiece infeed end.

09.

AIR LOADED SIDE PRESSURE WHEELS

+The front side pressure wheel on left vertical spindle fully eliminates unsmooth problem when feeding short or narrow stock. The pressure plate is easy to adjust.

SPINDLE ARRANGEMENT

5-Spindle  GL-530

Feed motor 10 HP / Elevation motor 1 HP

Bottom←Top←Left←Right←Bottom

15 HP ←15 HP ←10 HP ←10 HP ←15 HP 

6-Spindle  GL-630

Feed motor 10 HP / Elevation motor 1 HP

Bottom←Top←Top←Left←Right←Bottom

15 HP ←15 HP ←15 HP ←10 HP ←10 HP ←15 HP

7-Spindle  GL-730

Feed motor 10 HP / Elevation motor 1 HP

Bottom←Top←Top←Right←Left←Right←Bottom

15 HP ←15 HP ←15 HP ←10 HP←10 HP ←10 HP ←15 HP

7-Spindle  GL-730A

Feed motor 10 HP / Elevation motor 1 HP

Bottom←Top←Bottom←Top←Left←Right←Bottom

15 HP ←15 HP ←15 HP ←15 HP ←10 HP ←10 HP ←15 HP

8-Spindle  GL-830

Feed motor 10 HP / Elevation motor 1 HP

Bottom←Top←Top←Left←Right←Left←Right←Bottom

15 HP ←15 HP ←15 HP ←10 HP ←10 HP ←10 HP ←10 HP ←15 HP

9-Spindle  GL-930

Feed motor 10 HP / Elevation motor 1 HP

 

Bottom←Top←Bottom←Top←Left←Right←Left←Right←Bottom

15 HP ←15 HP ←15 HP ←15 HP ←10 HP ←10 HP ←10 HP ←10 HP 15 HP

OPTIONAL EQUIPMENT

/ AUTOMATIC FEEDING MAGAZINE
/ DIGITAL POSITIONING CONTROLLER
/ GROOVE GUIDE TABLE
/ CE CERTIFICATION
/ SPINDLE DIAMETER 40MM, 1-13/16”, 2-1/8”
/ ATS SYSTEM
/ EXTEND INFEED TABLE LENGTH
/ UNIVERSAL SPINDLE
/ FEED SPEED 6-60M/MIN (15-30HP)
/ FEED SPEED 8-80M/MIN (25-40HP)
/ SPINDLE MOTOR INCREASE (15-40HP)
/ INFEED UPPER PRESSURE ROLLER WITH AIR PRESSURE
/ STRAIGHT JOINTER
/ PROFILE JOINTER


The ATS system employs a PLC control combined with touch sensing screen for maximum operation convenience.
The control system provides 200 sets memory capacity.
SPINDLE DIGITAL POSITIONING CONTROLLER

Available to equip for controlling any spindle as requested.
The digital positioning controller permits fast, convenient and high accuracy spindle positioning.

This spindle can be tilted for complicated cutting jobs.

The straight jointer is controlled by manual. Easy to operate and best quality of product.
Automatic feed of jointing stone gives quick and accurate knife jointing operation.

The fully automatic knife profile jointer is controlled remotely for convenient knife jointing operation.
The knife profile jointing is performed directly on the moulder for consistent cutting circle for all knives. It assures repetitive profile accuracy and superior surface effect. The jointing stone feed is pneumatically operated.

This mechanism provides maximum convenience for feeding stock into the machine, keeping downtime to the minimum, and increasing the rate of production.
Especially helpful when cutting short stock. (Min. 300mm)
Show More

GAU JING

MACHINERY  INDUSTRIAL CO.,LTD.

ADDRESS /

No.33, Lane 355, Pu Zei St.,

Feng Yuan 420, Taichung, Taiwan

E-MAIL / g8664278@ms47.hinet.net

TEL / +886-4-2527-4116

FAX / +886-4-2528-2376