Copyright © 2017 GAU JING MACHINERY INDUSTRIAL CO., LTD.  | design by megaweb

1/2

SERIES DEMAND

/ Price economy

/ Performance trust

For over a long time, operators have searched for a 4-side moulder that is economically prices, but without sacrificing machine efficiency and quality.

GAU JING New GS series 4-side moulder is just the machine that meets all these objective as you have expected. The massive machine frame is manufactured from cast iron, rib reinforced to provide maximum rigidity and stability. All control levers for the spindles are located at front of the machine for convenient adjustment. Variable feed speed makes this machine ideal for cutting all types of wood material. Side front pressure plate on left vertical spindle assures smooth feeding for short or narrow workpieces.

Entire machine is designed to integrate many fine features normally expected only from a big machine. Each machine produced is backed with the GAU JING’s tradition of quality that you can trust.

SPECIFICATIONS

SERIES FEATURES

01.

CONVENIENT INFEED ADJUSTMENT

+The infeed table and fence are conveniently adjusted by the separate control levers.

02.

OVER HEIGHT PROTECTION

 

+In case workpeice exceeds the rated maximum height, it will be restricted by the over height protection device which is provided at the workpiece infeed end.

03.

FRONT AND REAR PRESSURE PLATE

+The front pressure plate features “draw-back” performance, which fully avoid damage on cutters caused by an over-height workpeice.


+The rear pressure plate provides extremely uniform holding pressure for outstanding parallelism accuracy of machine.

04.

SIDE FRONT PRESSURE PLATE ON LEFT VERTICAL SPINDLE

+It fully eliminates unsmooth problem when feeding short or narrow stock. The pressure plate is easy to adjust.

05.

CONVENIENT SPINDLE ADJUSTMENT

+All control levers for the spindles are located at the front of the machine for convenient adjustment.

+Each spindle is provided with a mechanical digital readout, giving accurate adjustment.

SPINDLE ARRANGEMENT

4-Spindle  GS-423

Feed motor 3 HP / Elevation motor 1/3 HP

Top←Left/Right←Bottom

7.5 HP ← 10 HP  ←7.5 HP

5-Spindle  GS-523

Feed motor 3 HP / Elevation motor 1/3 HP

Bottom←Top←Left/Right←Bottom

7.5 HP ←7.5 HP ← 10 HP ←7.5 HP

6-Spindle  GS-623

Feed motor 5 HP / Elevation motor 1/3 HP

Bottom←Top←Top←Left/Right←Bottom

7.5 HP ←7.5 HP ←7.5 HP ← 15 HP ←7.5 HP

5-Spindle  GS-523U

Feed motor 3 HP / Elevation motor 1/3 HP

Universal←Top←Left/Right←Bottom

5 HP 7.5 HP ← 10 HP ←7.5 HP

6-Spindle  GS-623U

Feed motor 3 HP / Elevation motor 1/3 HP

Universal←Bottom←Top←Left/Right←Bottom

5 HP ←7.5 HP ←7.5 HP← 10 HP ←7.5 HP

OPTIONAL EQUIPMENT

/ AUTOMATIC FEEDING MAGAZINE
/ SPINDLE DIGITAL POSITIONING CONTROLLER
/ GROOVE GUIDE TABLE
/ SPINDLE SPEED 7200/8000 RPM
/ AUXILIARY FEED ROLLER FOR SHORT WORKPIECE
/ EXTEND INFEED TABLE LENGTH
/ SPINDLE MOTOR INCREASE
/ TOOL RADIUS DISPLAY COUNTER
/ PRESSURE BOARD BEFORE TOP SPINDLE, AIR PRESSURE
/ TOP SPINDLE FRONT/REAR PRESSURE BOARD WITH UP/DOWN DIGITAL READOUT
/ CE CERTIFICATION


This mechanism provides maximum convenience for feeding woodpiece into the machine, keeping downtime to the minimum and increasing the rate of production.
Especially helpful when cutting short stock.
(Min. 300mm)
ADJUSTABLE AUXILIARY SHORT STOCK FEEDING ROLLER

The pressure roller for short stock can be fast raised, providing maximum convenience while in cutter changing or setup.

This spindle can be tilted for complicated cutting job.
Show More

GAU JING

MACHINERY  INDUSTRIAL CO.,LTD.

ADDRESS /

No.33, Lane 355, Pu Zei St.,

Feng Yuan 420, Taichung, Taiwan

E-MAIL / g8664278@ms47.hinet.net

TEL / +886-4-2527-4116

FAX / +886-4-2528-2376